RP2 - TP2000
Home > Refrigerant transfer pumps > RP2 - TP2000
RP2 - TP2000
The refrigerant transfer pump is connected between the refrigerant tank and the charging unit to keep the refrigerant gas in the liquid phase and at the correct pressure, for optimal speed and accuracy of the charging station.
The RP2 and the TP2000 use two pistons having different diameters. The smaller one (refrigerant piston) is used to pressurize the refrigerant from the vapour state to a liquid via the larger air driven piston which can boost the pressure within the pump.
The pressure is adjustable to accommodate various refrigerants. An on-board accumulator on the outlet side of the RP2, pre-charged with nitrogen, stabilizes the pressure when the piston changes direction. The accumulator is pre-charged with nitrogen.
On the inlet side of the pump a refrigerant filter eliminates any impurities from the storage tank. RP2 and TP2000, like all the GalileoTP's products, are designed and manufactured according to internationally accepted safety standards.
The RP2 and the TP2000 use two pistons having different diameters. The smaller one (refrigerant piston) is used to pressurize the refrigerant from the vapour state to a liquid via the larger air driven piston which can boost the pressure within the pump.
The pressure is adjustable to accommodate various refrigerants. An on-board accumulator on the outlet side of the RP2, pre-charged with nitrogen, stabilizes the pressure when the piston changes direction. The accumulator is pre-charged with nitrogen.
On the inlet side of the pump a refrigerant filter eliminates any impurities from the storage tank. RP2 and TP2000, like all the GalileoTP's products, are designed and manufactured according to internationally accepted safety standards.
You have to login to download this file
| << Back |
